Description:

This driver controls the Kramer VP-88ETH Matrix switcher. This driver can be configured to switch audio and video together (audio-follow-video), or separately (breakaway).

Quirks and Limitations:

None known at this time

Connection Details:

The parameters are 9600 baud, 8 bits, one stop bit, no parity, no handshaking. During installation, you can select to configure the driver either as audio-follow-video, in which case you will have only video output fields. When selecting an input for the output, both audio and video signals will switch. If you select breakaway mode, then you will have audio and video outputs and inputs, and you will be able to switch audio and video separately. Note that even though a field is provided to switch between these two modes after driver installation, changing that field will not affect the fields that have already been created.

Driver Fields

This section lists the fields that the driver makes available, their types, minimum and maximum values, etc...

Name	Type	R/W	Description/Limits
AllOutputs	String	W	Set the input for all outputs. Valid values are Blank, or Input1 to Input8. Note: In breakaway mode, this field affects only video outputs.
AudioAllOutputs	String	W	Set the audio input for all audio outputs. Valid values are NoInput, or AudioInput1 to AudioInput8. This field will only be available if breakaway mode is selected on installation.
AudioOutputX	String	R/W	Read or set the input for output X. Valid values are NoInput, or AudioInput1 to AudioInput8. These fields will only be available if breakaway mode is selected on installation.
OutputX	String	R/W	Read or set the input for output X. Valid values are Blank, or Input1 to Input8. If in breakaway mode, these fields will only affect video outputs.
BreakawaySetting	String	R/W	Switch the mode between AudioFollowVideo and AudioBreakaway.