Description:

This driver controls the Mitsubishi XD400U, XD450U and XD480U DLP data projector. This driver is PDL based and the protocol file is MitsubishiXD400U.CQCProto.

Quirks and Limitations:

If using a XD400U, the projector does not have the DVI input, but the driver has this input available to it and hence the projector will not reposnd to a request to change to the DVI input if used with the 400U. This does not affect the XD450U and the XD480U.

Connection Details

The XD4x0U connection is serial at 9,600, N, 8, 1..

Driver Fields

This section lists the fields that the driver makes available, their types, minimum and maximum values, etc...

Name	Type	R/W	Description/Limits
Input	String	R/W	An enumerated field to select the desired input. The values are: Computer 1, Computer 2, DVI, Video 1 & Video 2.
Format	Boolean	R/W	Selects 16:9 or 4:3
RemoteCommands	String	W	Allow emulation of the remote control
Power	Boolean	R/W	Turns the projector on or off
PowerTogglePossible	Boolean	R	A field to determine if the projector can be turned on or off
Passthrough	String	W	Allows for any commands not covered by defined fields to be sent to the projector, such as those that can be used to set up the projector
SignalStatus	Bool	R	Reads a value to determine if a signal is present to the currently selected input