Marantz VP12S2

Make/Model	Device Version	Connection Type
Marantz/VP12S1	N/A	Serial

Description:

This driver controls the Marantz VP12S2 DLP projector. This is one of the HD2 family of DLP projectors, for better black level, includes the Faroudja DCDi de-interlacing chip for improved handling of interlaced material, and has a native widescreen format.
This driver's server side component is CML based. The driver classes for this device are in the MEng.System.CQC.Drivers.MarantzVP12S2 scope. The driver was provided by Eric Bariaux of www.tinsys.com.

Quirks and Limitations:

None known at this time.

Connection Details

The Marantz VP12 uses a serial connection at 9600, no parity, 8 data bits, one stop bit, and no flow control.

Driver Fields

This section lists the fields that the driver makes available, their types, minimum and maximum values, etc...
Name Type R/W Description/Limits
Aspect String R/W Read or set the aspect ratio. This is an enumerated field with the values: Normal, Through, Full, Zoom.
BlackSetup String R/W Read or set the black level setup. This is an enumerated field with the values: 0IRE, 7.5IRE
ErrorStatus String R A read-only string that will hold any projector error status information.
Focus Boolean R/W Read or set the focus setting.
InputSrc String R/W Read or set the current input source. This is an enumerated field with the values: Component, Video, S-Video, RGB, Aux.
KeystoneH Int R/W Read or set the horizontal keystone. The valid range is -30 to +30.
KeystoneV Int R/W Read or set the vertical keystone. The valid range is -30 to +30.
LampMode String R/W Read or set the lamp mode. This is an enumerated field with values: High, Low
Memory String R/W Read or set the projector memory to use. This is an enumerated field with values: Theater1, Theater2, Theater3, Theater Default, Standard1, Standard2, Standard3, Standard Default, Dynamic1, Dynamic2, Dynamic3, Dynamic Default
Power Boolean R/W Read or set the device power state. Write true to power it on, or false to power it off.
Version String R A read-only string that contains projector firmware version information.
V-Mute Boolean R/W Read or set the video mute state.

Name	Type	R/W	Description/Limits
Aspect	String	R/W	Read or set the aspect ratio. This is an enumerated field with the values: Normal, Through, Full, Zoom.
BlackSetup	String	R/W	Read or set the black level setup. This is an enumerated field with the values: 0IRE, 7.5IRE
ErrorStatus	String	R	A read-only string that will hold any projector error status information.
Focus	Boolean	R/W	Read or set the focus setting.
InputSrc	String	R/W	Read or set the current input source. This is an enumerated field with the values: Component, Video, S-Video, RGB, Aux.
KeystoneH	Int	R/W	Read or set the horizontal keystone. The valid range is -30 to +30.
KeystoneV	Int	R/W	Read or set the vertical keystone. The valid range is -30 to +30.
LampMode	String	R/W	Read or set the lamp mode. This is an enumerated field with values: High, Low
Memory	String	R/W	Read or set the projector memory to use. This is an enumerated field with values: Theater1, Theater2, Theater3, Theater Default, Standard1, Standard2, Standard3, Standard Default, Dynamic1, Dynamic2, Dynamic3, Dynamic Default
Power	Boolean	R/W	Read or set the device power state. Write true to power it on, or false to power it off.
Version	String	R	A read-only string that contains projector firmware version information.
V-Mute	Boolean	R/W	Read or set the video mute state.